Peavey ICA 800v Dual Channel Amplifier 70v Installation Amp
Brief Description:
This Peavey ICA 800v Industrial Amplifier is in fully working condition!
It shows some signs of use and normal wear.
Please refer to pictures for details!
Product Specifications:
Model ICA 800V
Product Type Amplifier
Rated power (two channels) 400 Watts @ 20 Hz - 20 kHz both channels driven at < 0.1% THD
Minimum load impedance ICA 800V-70: 12.5 Ohms ICA 800V-100: 25 Ohms
Maximum RMS voltage swing ICA 800V-70: 85 Volts ICA 800V-100: 110 Volts
Frequency response 10 Hz - 25 kHz; +0, -.3 dB at 1 Watt
Power bandwidth Specifications
ICA 800V-70 10 Hz - 100 kHz; +0, -3 dB at rated power
ICA 800V-100 10 Hz - 50 kHz; +0, -3 dB at rated power
THD (two channels driven) Specifications
ICA 800V-70
ICA 800V-100
SMPTE IMD
Slew Rate 35 V/μs
Damping Factor >400:1 @ 20 Hz - 400 Hz
Input CMRR >-65 dB @ 1 kHz
Voltage gain x40 (32 dB)
Input sensitivity ICA 800V-70: 1.77 Volts for rated output ICA 800V-100: 2.5 Volts for rated output
Input impedance 20 k Ohms, balanced
Hum and Noise > -108 dB, “A” weighted referenced to rated power
Crosstalk > -65 dB, “A” weighted referenced to rated power
Power consumption @ 1/8 power ICA 800V-70: 7 amps ICA 800V-100: 6.5 amps
Power consumption @ 1/3 power ICA 800V-70: 10 amps ICA 800V-100: 10 amps
Idle power consumption .5 amps in Standby Mode
Maximum current draw ICA 800V-70: 1,680 Watts for rated power ICA 800V-100: 1,700 Watts for rated power
Thermal Emissions (BTU/hr.) 550 @ 1/8 power, 835 @ 1/3 power
Cooling 120 mm DC fan, off until heatsinks reach 45o C, then variable speed
Controls 2 rear panel attenuators, sequential turn-on / off
Indicator LEDs 2 Clip, 2 Signal, 2 LFC, 1 Protect, 1 Power
Protection Temp, DC, turn-on bursts, subsonic, incorrect load or short
Connectors 8-pin plugable signal input, 4-pin plugable sequential power, 4-terminal barrier strip
Construction All-steel; 16 gauge chassis, 18 gauge top, 12 gauge rack ears
Weight 45 lbs (20.4 kg)
Dimensions 5.25" x 16.4" x 19" 133 mm x 416.6 mm x 483 mm
